LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> HHR L4-2.2L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oil Pressure Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oil Pressure Sensor: Service and Repair



Engine Oil Pressure Sensor and/or Switch Replacement
Removal Procedure





1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the oil pressure sensor electrical connector (5).





3. Remove the engine oil pressure sensor.

Installation Procedure





1. Notice: Refer to Fastener Notice.

Install the engine oil pressure sensor.
Tighten the sensor to 22 Nm (16 ft. lbs.).





2. Disconnect the oil pressure sensor electrical connector (5).
3. Lower the vehicle.
scientia non olet · About LEMON Manuals