LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2006 >> Cobalt SS, 4D Sedan, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.4L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Level Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Carefully slide the fuel level sensor into the slots on the fuel pump module bowel.
  2. Secure the retaining tab (2) on the sensor into the slot on the pump module bowel.
  3. Connect the fuel level sensor electrical connector to the pump module.
  4. Install the fuel level sensor wiring harness connector to the molded-in tab (1) on the pump module bowl.
    5. Fig 1: View Of Fuel Pump Module Assembly
    GM889989Courtesy of GENERAL MOTORS CORP.
  5. Install the fuel pump module assembly. Refer to Fuel Pump Module Replacement .
scientia non olet · About LEMON Manuals