October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
Courtesy of GENERAL MOTORS CORP.
- Use the J 34094-A
to set the middle thermo pin (123). See Special Tools .
- Install the new thermo element plate (122).
- Install the pin and washer (120).
- Use the J 34094-A
to set the height of the pin and washer (120) furthest from the accumulator. See Special Tools .
- Use the J 34094-A
to set the height of the second pin and washer (120). See Special Tools .
Courtesy of GENERAL MOTORS CORP.
- Carefully install the thermo element (121) between the two pin and washers (120). The V in the thermo element (121) must contact the thermo element plate (122).
- Install the oil pan. Refer to Oil Pan Replacement .
- Refill fluid as necessary. Refer to Capacities - Approximate Fluid
.