LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.4L - Introduction >> Repair Instructions >> Idle Air Control (IAC) Valve Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the canister purge valve. Refer to Evaporative Emission (EVAP) Canister Purge Solenoid Valve Replacement .
  2. Fig 1: View Of IAC Valve Electrical Connector
    GM69056Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the idle air control (IAC) electrical connector.
  4. Fig 2: Installing IAC Valve Screws
    GM185614Courtesy of GENERAL MOTORS CORP.
  5. Remove the idle air control valve attaching screws.
  6. Fig 3: View Of IAC Valve
    GM185583Courtesy of GENERAL MOTORS CORP.
  7. Remove the idle air control valve.
  8. Fig 4: Installing IAC Valve O-Ring
    GM185626Courtesy of GENERAL MOTORS CORP.
  9. Remove the idle air control valve O-ring.