LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 3.4L - Introduction >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the fastener from the coolant tank.
  2. Remove the coolant tank and set aside.
  3. Remove the 3 bolts from the support brace and remove the brace.
  4. Disconnect the mass air flow (MAF) sensor electrical connector.
  5. Loosen the 2 clamps on the AIR intake duct/MAF sensor assembly.
  6. Remove the air inlet duct/MAF sensor assembly (1).
    7. Fig 1: Locating Air Cleaner Assembly Components
    GM512027Courtesy of GENERAL MOTORS CORP.
  7. Unsnap the 2 latches and remove the air cleaner housing cover (2).
  8. Remove the air filter element (3).
  9. Unsnap the latch on the upper cover and remove the cover.
    10. Fig 2: View Of PCM
    GM512028Courtesy of GENERAL MOTORS CORP.
  10. Carefully remove the powertrain control module (PCM) leaving the 2 harnesses connected and set aside.
    11. Fig 3: Locating Bolts For Air Cleaner Assembly
    GM512030Courtesy of GENERAL MOTORS CORP.
  11. Remove the 2 bolts (2) from the air cleaner assembly and remove the housing.
scientia non olet · About LEMON Manuals