LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Electrical >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Driver Information Center Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: View Of Driver Information Display
    GM318181Courtesy of GENERAL MOTORS CORP.
  1. Install the driver information display to overhead console.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the driver information display to overhead console screws.

    Tighten:  Tighten the screws to 1 N.m (9 lb in).

  3. Install the overhead console. Refer to Console Replacement - Overhead (Single) or Console Replacement - Overhead (Dual) or Console Replacement - Overhead (CF5) in Interior Trim.
  4. Calibrate the compass. Refer to Electronic Compass Calibration .
scientia non olet · About LEMON Manuals