LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 6.0L - Introduction >> Repair Instructions >> Ignition Coil(s) Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement in Engine Mechanical - 6.0L.
    2. Fig 1: View Of Spark Plug Wires At Ignition Coil
    GM344169Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the spark plug wires at the ignition coils.
    3. Fig 2: View of Ignition Coil Harness Connector
    GM339299Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the ignition coil harness connector.
    4. Fig 3: View Of Ignition Coil Mounting Bolts
    GM344167Courtesy of GENERAL MOTORS CORP.
  4. Remove the ignition coil mounting bolts.
    5. Fig 4: View Of Ignition Coils & Spark Plug Wires
    GM339300Courtesy of GENERAL MOTORS CORP.
  5. Remove the ignition coil.
scientia non olet · About LEMON Manuals