LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> SSR Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Data Link Communication System) >> Repair Instructions >> Data Link Connector Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the data link connector to the instrument panel.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the data link connector bolt.

    Tighten:  Tighten the bolt to 6 N.m (53 lb in).

    3. Fig 1: Installing Data Link Connector Bolt
    GM786370Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals