LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Impala SS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Brace Replacement (3.8L) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Removing/Installing Generator Brace & Retainers (L36)
    GM461838Courtesy of GENERAL MOTORS CORP.
  1. Install the generator rear brace (4).
  2. Install the generator rear brace bolt (3).
  3. Install the generator rear brace nut (5).
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Tighten the generator bolt and nut in the following sequence:

    Tighten: 

    1. Tighten the generator rear brace bolt (3) to 50 N.m (37 lb ft).
    2. Tighten the generator rear brace nut (5) to 50 N.m (37 lb ft).

scientia non olet · About LEMON Manuals