LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Impala SS >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Brace Replacement (3.4L) >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Removing/Installing Generator & Bolts (3.1L)
    GM302473Courtesy of GENERAL MOTORS CORP.
  1. Install the generator rear brace.
  2. Install the generator pivot bolt (1).
  3. Install the generator rear brace nut (4).
    4. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Tighten the generator bolt and nut in the following sequence:

    Tighten: 

    1. Tighten the generator pivot bolt (1) to 50 N.m (37 lb ft).
    2. Tighten the generator rear brace nut (4) to 25 N.m (18 lb ft).

scientia non olet · About LEMON Manuals