LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1211 (Engine Controls/Fuel - 3.6L - Repair Instructions) >> Repair Instructions >> Engine Control Module Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of ECM At Battery Tray
    GM1838645Courtesy of GENERAL MOTORS COMPANY
  1. Using a scan tool, retrieve the percentage of remaining engine oil. Record the remaining engine oil life.
  2. Record the preset radio stations.
  3. Turn the ignition OFF.
  4. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (LE5, LE9, LY7) .
  5. Lift and gently pull the ECM up and out of the retainer on the battery tray.
    6. Fig 2: Identifying ECM Wiring Harness Connectors
    GM1838648Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect the engine wiring harness electrical connectors (1) from the ECM.
  7. Disconnect the body wiring harness electrical connector (2) from the ECM.
scientia non olet · About LEMON Manuals