LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 1211 (Engine Controls/Fuel - 3.6L - Repair Instructions) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Accelerator Pedal Position Sensor & Bolts
    GM1544734Courtesy of GENERAL MOTORS COMPANY
  1. Install the APP sensor (2).
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the APP bolts (1) and tighten to 10 N.m (89 lb in).
  3. Connect the APP sensor electrical connector.
  4. Confirm that the APP sensor connector locking clip is fully secured.
scientia non olet · About LEMON Manuals