LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Cobalt L4-2.2L VIN F >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Oil Pressure Sensor >> Service and Repair
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Oil Pressure Sensor: Service and Repair



Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure
1. Disconnect the negative battery cable.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Disconnect the engine oil pressure sensor electrical connector.





4. Remove the engine oil pressure sensor.

Installation Procedure





1. Notice: Refer to Fastener Notice in Service Precautions.

Install the engine oil pressure sensor.
^ Tighten the oil pressure switch to 22 Nm (16 ft. lbs.).
2. Connect the engine oil pressure sensor electrical connector.
3. Lower the vehicle.
4. Connect the negative battery cable.
scientia non olet · About LEMON Manuals