LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Cobalt L4-2.2L VIN F >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Body Control Module >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Data Definitions
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Data Definitions



SCAN TOOL DATA DEFINITIONS

Accessory Relay Command: The scan tool displays the state of the accessory relay command.

Battery Voltage Signal: The scan tool displays the vehicle voltage.

Ignition Mode Switch: The scan tool displays the ignition switch voltage signal. This signal is derived from the ignition Off/Run/Crank circuit.

Ignition Switch Accessory: The scan tool displays the state of the ignition switch accessory circuit.

Ignition Switch Run/Crank: The scan tool displays the state of the ignition switch Run/Crank circuit.

Key In Ignition Cylinder: The scan tool displays whether or not the key is in the ignition cylinder.

Power Mode: The scan tool displays the vehicle power mode.

Run Relay Command: The scan tool displays the state of the Run relay.

Run Crank Relay Command: The scan tool displays the state of the Run Crank relay.
scientia non olet · About LEMON Manuals