Removal Procedure

Fig 1: View Of Automatic Transmission Shift Lock Control Actuator

Courtesy of GENERAL MOTORS CORP.

CAUTION: Refer to SIR Caution in Cautions and Notices.

Disable the SIR system. Refer to SIR Disabling and Enabling Zones in SIR.
Put the shift lever clevis into the neutral position.
Remove the knee bolster. Refer to Knee Bolster Replacement - Left in Instrument Panel, Gages, and Console.
Disconnect the electrical connector.
Use a small screwdriver to pry the A/T shift lock control actuator away from the steering column jacket assembly and the cable shift cam assembly.
Remove the A/T shift lock control actuator.