Removal Procedure
WARNING: This page is about a different car, the 2005 GMC Sierra and 2005 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the engine harness electrical connector from the generator battery control module.
- Remove the negative battery cable. Refer to Battery Negative Cable Replacement (4.3L Engine) or Battery Negative Cable Replacement (4.8L, 5.3L, 6.0L, and 8.1L Engines) or Battery Negative Cable Replacement (6.6L (LLY) Engine) .
- Cut the tie straps and electrical tape attaching the generator battery control module to the battery cable.
- Squeeze the negative battery cable branches together.
- Slide the generator battery control module off of the negative battery cable.
IMPORTANT:
Note the orientation of the generator battery control module prior to removal.