LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2005 >> Avalanche 2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Engine Controls - 6.6L (Introduction)) >> Repair Instructions >> Boost Pressure Sensor Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

WARNING: This page is about a different car, the 2005 GMC Sierra, 2005 GMC Cab & Chassis Sierra, 2005 Chevrolet Silverado, and 2005 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Boost Sensor Bracket Bolt
    GM1412235Courtesy of GENERAL MOTORS CORP.
  1. Remove the right fuel rail fuel feed pipe. Refer to Fuel Rail Fuel Feed Pipe Replacement - Right .
  2. Remove the boost sensor bracket bolt (1).
  3. Remove the boost sensor and bracket.
  4. Separate the boost sensor from the bracket.
  5. Inspect the sensor seal for damage, replace as necessary.
scientia non olet · About LEMON Manuals