LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Automatic Level Control Air Compressor Head Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Remove the automatic level control air compressor from the vehicle. Refer to Air Compressor Replacement .
  2. Remove the air dryer from the automatic level control air compressor. Refer to Automatic Level Control Air Dryer Replacement .
  3. Remove the wiring terminals B and C from the automatic level control air compressor electrical connector.
  4. Fig 1: Locating Automatic Level Control Air Compressor Head Components
    GM187229Courtesy of GENERAL MOTORS CORP.
  5. Remove the bolts/screws from the automatic level control air compressor head (2).
  6. Remove the automatic level control air compressor head.
  7. Remove the O-ring (3) from the automatic level control air compressor.