LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> SSR >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 4L60-E/4L65-E - Introduction, Service & Replacement >> Repair Instructions >> Floor Shift Control Knob Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: View Of Floor Shift Control Knob & Screw
    GM1335263Courtesy of GENERAL MOTORS CORP.
  1. Install the knob onto the transmission control.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten control knob set screw.

    Tighten:  Tighten the control knob set screw to 2.5 N.m (22 lb in).