LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Optra Base, Standard >> Repair and Diagnosis >> Transmission >> Clutch System >> Repair Instructions >> Clutch and Pressure Plate Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: View Of Pressure Plate
    GM1251807Courtesy of GENERAL MOTORS CORP.
  1. Coat the spline on the clutch disc with multi-purpose grease.
  2. Align the pressure plate and the clutch disc onto the flywheel using the J 42474  . See Special Tools .
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the pressure plate bolts.

    Tighten:  Tighten the bolts to 15 N.m (11 lb ft)  .

  4. Remove the J 42474  . See Special Tools .
  5. Install the transaxle into the vehicle. Refer to Transmission Replacement in Manual Transmission - D16 or Transmission Replacement in Manual Transmission - D20.
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals