LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Optra Base, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 1.8L (L79) - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: View Of Camshaft Position Sensor Bolts
    GM1265328Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. Install the CMP sensor and bolts.

    Tighten:  Tighten the CMP bolts to 8 N.m (71 lb in)  .

    2. Fig 2: Identifying Camshaft Position Sensor
    GM1265327Courtesy of GENERAL MOTORS CORP.
  2. Install the timing belt front cover, the crankshaft pulley, the accessory drive belt, and the air filter. Refer to Timing Belt Replacement .
  3. Connect the sensor electrical connector.
  4. Install the engine cover.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals