Circuit Description

The throttle body assembly contains a throttle position (TP) sensor. The TP sensor is mounted within the throttle body assembly and is not serviceable. The TP sensor is a potentiometer which provides a signal voltage that changes relative to the throttle blade angle. The engine control module (ECM) supplies the TP sensor with a common 5-volt reference circuit, a common low reference circuit, and a signal circuit. The TP sensor signal voltage decreases from more than 4 volts at idle to less than 1 volt at wide open throttle (WOT).

If the ECM detects the TP sensor signal voltage is too high, this DTC sets.