LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Malibu Base >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Theft Deterrent System >> Repair Instructions >> Theft Deterrent Control Module Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Installing Theft Deterrent Control Module
    GM1207719Courtesy of GENERAL MOTORS CORP.
  1. Install the theft deterrent control module.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Tighten the theft deterrent control module screws.

    Tighten:  Tighten the screws to 5 N.m (44 lb in).

  3. Install the ignition switch. Refer to Ignition Switch Replacement in Instrument Panel, Gages and Console.
  4. Perform the vehicle theft deterrent system learn procedure. Refer to Programming Theft Deterrent System Components .
scientia non olet · About LEMON Manuals