July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Disc Brake Servicing Specifications

DISC BRAKE SERVICING SPECIFICATIONS

Application

In. (mm)

Front Brakes

Rotor Discard Thickness ⁽¹⁾

1.21 (30.7)

Rotor Maximum Allowable Assembled Lateral Runout

0.002 (0.06)

Rotor Maximum Allowable Scoring

0.059 (1.5)

Rotor Maximum Allowable Thickness (Variation)

0.001 (0.025)

Rotor Minimum Allowable Thickness (After Refinish)

1.25 (31.7)

Rotor Thickness (New)

1.27 (32.2)

Rear Brakes

Rotor Discard Thickness ⁽¹⁾

0.35 (9)

Rotor Maximum Allowable Assembled Lateral Runout

0.002 (0.06)

Rotor Maximum Allowable Scoring

0.059 (1.5)

Rotor Maximum Allowable Thickness (Variation)

0.001 (0.025)

Rotor Minimum Allowable Thickness (After Refinish)

0.42 (10.6)

Rotor Thickness (New)

0.43 (11)

⁽¹⁾	All brake rotors have a discard dimension cast into them. Replace any rotor that does not meet this specification. After refinishing rotor, replace any rotor that does not meet minimum thickness specification.