LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 913 (Wiper System & Washer System) >> Repair Instructions >> Windshield Washer Solvent Level Indicator Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

WARNING: This page is about a different car, the 2010 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement .
    2. Fig 1: View Of Washer Solvent Container Level Sensor Electrical Connector
    GM1207514Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the washer solvent container level sensor electrical connector.
  3. Using a small flat-bladed tool, remove the washer solvent level indicator (4) from the washer solvent container (1).
  4. Contain all lost windshield washer solvent into a suitable clean container.
  5. Using a small flat-bladed tool, remove the level indicator seal (3) from the washer solvent container (1).
scientia non olet · About LEMON Manuals