LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> External Pages >> Different car >> Section 751 (Anti-Lock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Brake Pressure Modulator Valve Bracket Replacement

WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Brake Pressure Modulator Valve (BPMV) Bracket
GM1657874Courtesy of GENERAL MOTORS CORP.
Callout Component Name
Preliminary Procedure: 
Remove the brake pressure modulator valve (BPMV). Refer to Brake Pressure Modulator Valve Replacement 
1 Brake Pressure Modulator Valve (BPMV) Mounting Bolt - Upper
NOTE: Refer to Fastener Notice .

Tighten:  12 N.m (106 lb ft)
2 BPMV Mounting Bolt - Lower (Qty: 2)

Tighten:  12 N.m (106 lb ft)
3 BPMV Bracket
scientia non olet · About LEMON Manuals