October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

Install the MAP sensor.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the MAP sensor screws.
Tighten: Tighten the screws to 5 N.m (44 lb in).
Connect the MAP sensor electrical connector and the vacuum hose.
Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical 3.8L.

Fig 1: Installing MAP Sensor (L67)

Courtesy of GENERAL MOTORS CORP.