LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Idle Air Control (IAC) Valve Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the fuel injector sight shield. Refer toFuel Injector Sight Shield Replacement in Engine Mechanical-3.8L.
  2. Disconnect the idle air control valve (IAC) electrical connector.
    3. Fig 1: View Of IAC Valve Electrical Connector
    GM155466Courtesy of GENERAL MOTORS CORP.
  3. Remove the IAC valve screws.
    4. Fig 2: Removing IAC Valve Screws
    GM185614Courtesy of GENERAL MOTORS CORP.
  4. Remove the IAC valve.
    5. Fig 3: Removing IAC Valve
    GM185583Courtesy of GENERAL MOTORS CORP.
  5. Remove the IAC valve O-ring.
    6. Fig 4: Removing IAC Valve O-Ring
    GM185626Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals