LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Outlet Pipe Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. Install the EGR valve outlet pipe (1).
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the EGR outlet pipe bolt (3) to the intake manifold.

    Tighten:  Tighten the bolt to 30 N.m (22 lb ft).

  3. Install the EGR outlet pipe nut (2) to the EGR valve inlet adapter pipe.

    Tighten:  Tighten the nut to 30 N.m (22 lb ft).

  4. Install the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
    5. Fig 1: Installing EGR Valve Outlet Pipe
    GM703592Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals