LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Impala SS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System 3.8L (Introduction) >> Repair Instructions >> Accelerator Controls Cable Bracket Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 3.8L.
  2. Remove the cruise control cable from the throttle body lever.
  3. Remove the cruise control cable (1) from the bracket (2).
  4. Fig 1: Removing Cruise Control Cable
    GM179339Courtesy of GENERAL MOTORS CORP.
  5. Remove accelerator cable from the throttle body lever.
  6. Remove the accelerator cable (2) from the bracket (1).
  7. Fig 2: Removing Accelerator Cable
    GM179346Courtesy of GENERAL MOTORS CORP.
  8. Remove the accelerator controls cable bracket bolts.
  9. Remove the accelerator controls cable bracket from the throttle body.
  10. Fig 3: Removing Accelerator Controls Cable Bracket
    GM12246Courtesy of GENERAL MOTORS CORP.