October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

Position the lumbar control switch to the outer seat cushion trim panel.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the screws (1) to the lumbar control switch.
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 1: Installing Lumbar Control Switch Screws

Courtesy of GENERAL MOTORS CORP.

Install the outer seat cushion trim panel. Refer to Trim Panel Replacement - Front Seat .