LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pressure Pipe/Hose Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Raise the vehicle on a hoist. Refer to Lifting and Jacking the Vehicle in General Information.
    2. Fig 1: Identifying Power Steering Pressure Hose & Power Steering Gear
    GM639559Courtesy of GENERAL MOTORS CORP.
  2. Remove the front exhaust pipe with the catalytic converter, automatic transmission only. Refer to Catalytic Converter Replacement (2.2L) in Engine Exhaust.
  3. Remove the power steering pressure hose (1) from the power steering gear (3).
    4. Fig 2: View Of Power Steering Pressure Hose & Fittings
    GM490384Courtesy of GENERAL MOTORS CORP.
  4. Lower the vehicle.
  5. Remove the upper air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls-2.2L (L61).
  6. Remove the power steering pressure hose (3) from the power steering pump pipe (4).
  7. Remove the power steering pressure hose (3) from the vehicle.
scientia non olet · About LEMON Manuals