LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2004 >> Classic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Seat Belt Retractor Replacement - Rear >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: View of Rear Seat Without Cushion for Access to Rear Seat Belt Retractor
    GM165423Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Remove any twists in the seat belt webbing before final assembly.
  1. Install the rear seat outer retractor side belt.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolt (1) to the rear seat belt retractor.

    Tighten:  Tighten the bolt to 28 N.m (21 lb ft).

  3. Install the anchor plate bolt to the rear seat belt retractor.

    Tighten:  Tighten the bolt to 41 N.m (30 lb ft).

  4. Install the rear window panel trim. Engage the retainers.
  5. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
  6. Install the rear seat back cushion. Refer to Seat Back Replacement - Rear in Seats.
scientia non olet · About LEMON Manuals