Traction Control Switch: Service and Repair
Traction Control Switch ReplacementRemoval Procedure
1. Carefully remove the instrument panel dimmer switch bezel from the dash.
2. Disconnect the electrical connector from the traction control switch.
3. Remove the traction control switch from the instrument panel dimmer switch bezel. To avoid damage to the instrument panel dimmer switch bezel, use a flat bladed tool on the back side of the traction control switch to release the retaining clips.
Installation Procedure
1. Install the traction control switch to the instrument panel dimmer switch bezel.
2. Connect the electrical connector to the traction control switch.
3. Align the instrument panel dimmer switch bezel to the dash and carefully press the retaining clips into the correct mounting areas on the dash.
4. Verify the repair. Refer to Diagnostic System Check - ABS.