October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

Connect the electrical connector to the door lock receiver.
Engage the retaining tabs in order to install the door lock receiver to the IP upper trim.
Install the IP upper trim. Refer to TRIM PAD REPLACEMENT - INSTRUMENT PANEL (I/P) UPPER in Instrument Panel, Gages and Console.
Program transmitter to the new receiver. Refer to TRANSMITTER PROGRAMMING .

Fig 1: Connecting Electrical Connector To Door Lock Receiver
Courtesy of GENERAL MOTORS CORP.