LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Venture LS, Van Passenger Extended, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Repair Instructions >> Traction Control Switch Replacement >> Installation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Installation Procedure

  1. Connect the electrical connectors.
  2. Push in on the switch bank in order to install the switch bank.
    Fig 1: Connecting Electrical Connectors
    G01483743Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the bolts/screws to the switch bank to instrument panel.

    Tighten 

    Tighten the bolts/screws to 2.5 N.m (22 lb in).

    Fig 2: Installing Bolts/Screws To Switch Bank To Instrument Panel
    G01483744Courtesy of GENERAL MOTORS CORP.
  4. Install the instrument panel accessory trim plate. Refer to TRIM PLATE REPLACEMENT - INSTRUMENT PANEL (I/P) ACCESSORY  in Instrument Panel, Gages and Console.
    Fig 3: Installing Instrument Panel Accessory Trim Plate
    G01483745Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals