LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Venture Base, Van Passenger >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Wheel Control Switch Assembly Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

  1. Connect the electrical connector to the steering wheel control switch.
  2. Push the steering wheel controls switch into the steering wheel.
  3. Install the steering wheel controls wire harness to the retainers in the steering wheel.
  4. Install the inflatable restraint steering wheel module. Refer to REMOVAL & INSTALLATION (DRIVER-SIDE)  in Airbag.
    Fig 1: Installing Steering Wheel Controls Wire Harness
    G01483058Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals