LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Shift Interlock System >> Repair Instructions >> Automatic Transmission Shift Lock Actuator Replacement >> Removal Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Removal Procedure

  1. Remove the steering column trim covers. Refer to STEERING COLUMN TRIM COVERS REPLACEMENT  in Steering Wheel and Column.
  2. Remove the knee bolster.
  3. Remove the shift lever actuator. Refer to LINEAR SHIFT ASSEMBLY REPLACEMENT  in Steering Wheel and Column.
  4. Disconnect the electrical connector from the automatic shift lock control actuator.
  5. Remove the automatic shift lock control actuator from the steering column ball studs.
    Fig 1: Removing Automatic Shift Lock Control Actuator From Steering Column Ball Studs
    G01533782Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals