LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Venture Base, Van Cargo Extended >> Repair and Diagnosis >> Suspension >> Electronic Suspension >> Suspension Control System - Suspension Leveling >> Repair Instructions >> Automatic Level Control Air Compressor Head Replacement >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Remove the automatic level control air compressor from the vehicle. Refer to AIR COMPRESSOR REPLACEMENT   . 
  2. Remove the air dryer from the automatic level control air compressor. Refer to AUTOMATIC LEVEL CONTROL AIR DRYER REPLACEMENT   . 
  3. Remove the wiring terminals B and C from the automatic level control air compressor electrical connector.
  4. Remove the bolts/screws from the automatic level control air compressor head (2).
    Fig 1: Removing O-Ring From Automatic Level Control Air Compressor
    G01483358Courtesy of GENERAL MOTORS CORP.
  5. Remove the automatic level control air compressor head.
  6. Remove the O-ring (3) from the automatic level control air compressor.
scientia non olet · About LEMON Manuals