LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: View Of EVAP Purge Solenoid Vent Tube
    GM898353Courtesy of GENERAL MOTORS CORP.
  1. Remove the caps from the EVAP canister purge solenoid and the EVAP chassis pipe.
  2. Install the EVAP tube.
  3. Connect the EVAP tube to the EVAP chassis pipe.
  4. Connect the EVAP tube to the EVAP canister purge solenoid.
scientia non olet · About LEMON Manuals