LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Seat Belt Replacement - Front >> Removal Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal Procedure

  1. Disable SIR zone 6 or SIR zone 2. Refer to SIR Disabling and Enabling Zone 6 or SIR Disabling and Enabling Zone 2 in SIR.
  2. Remove the lock pillar trim. Refer to Trim Replacement - Lock Pillar in Interior Trim.
    3. Fig 1: Identifying CPA, Electrical Connector & Seat Belt Anchor Fastener
    GM1344130Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the connector positive assurance (1) from the seat belt pretensioner.
  4. Disconnect the electrical connector (1).
  5. Remove the seat belt anchor fastener from the floor (2).
    6. Fig 2: View of Seat Belt Guide Loop
    GM1344131Courtesy of GENERAL MOTORS CORP.
  6. Route the seat belt webbing and anchor through the seat belt guide loop.
    7. Fig 3: Identifying Seat Belt Fastener
    GM1344133Courtesy of GENERAL MOTORS CORP.
  7. Remove the seat belt fastener (1).
    8. Fig 4: Expanded View of Hanger Basket
    GM1344147Courtesy of GENERAL MOTORS CORP.
  8. Lift the seat belt pretensioner away from the hanger basket.
  9. Remove the seat belt from the vehicle.
scientia non olet · About LEMON Manuals