LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - 5.3L - Introduction >> Repair Instructions >> Camshaft Position (CMP) Sensor Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove intake manifold. Refer to Intake Manifold Replacement .
  2. Disconnect the electrical connector from the camshaft position (CMP) sensor.
    3. IMPORTANT: Clean the area around the CMP sensor before removal in order to prevent debris from entering the engine.
    Fig 1: View Of Camshaft Position (CMP) Sensor & Bolt
    GM260128Courtesy of GENERAL MOTORS CORP.
  3. Remove the CMP sensor retaining bolt.
  4. Remove the CMP sensor.
scientia non olet · About LEMON Manuals