LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> SSR Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Lumbar Replacement - Front Seat >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

    Fig 1: Identifying Lumbar Motor Mounting Rivets & Lumbar Assembly
    GM1310235Courtesy of GENERAL MOTORS CORP.
  1. Position the lumbar assembly (2) onto the seat.
  2. Install the lumbar motor to the seat frame with 2 new rivets (1).
    3. Fig 2: Identifying Seat Back Frame Wire & Lumbar
    GM1310233Courtesy of GENERAL MOTORS CORP.
  3. Attach the top and bottom of the lumbar (1) onto the seat back frame wire (2).
  4. Connect the electrical connector to the lumbar motor.
  5. Install the seat back panel. Refer to Seat Back Panel Replacement - Front .
  6. Install the seat back pad and cover. Refer to Seat Back Cover and Pad Replacement - Front .
  7. Install the seat in the vehicle. Refer to Seat Replacement .
scientia non olet · About LEMON Manuals