October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Installation Procedure
- Install the rear window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows .
- Connect the OnStar® connector, if equipped.
Courtesy of GENERAL MOTORS CORP.
- Connect the rear window defogger electrical connector, if equipped.
Courtesy of GENERAL MOTORS CORP.
- Connect the rear window radio antenna connector.
- Connect the OnStar® system.
- Verify the radio and the OnStar® has reception.
- Close the rear compartment lid.
- Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.