LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2003 >> Impala Base, 3.4 E >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Handle Lock Rod Guide Block Replacement >> Installation Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Installation Procedure

    Fig 1: Handle Lock Rod Guide Block
    GM794020Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Locate the opening in the retaining guide block (1).
  1. Install the inside handle rod to the retaining guide block (1), push inward to secure the rod.
  2. Install the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Impala)  or Trim Panel Replacement - Side Front Door (Monte Carlo)  or Install the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door .