Connecting Rod, Engine

Connecting Rod Bolts - First Pass 20 Nm (15 ft. lbs.)
Connecting Rod Bolts - Final Pass 85 degrees
Connecting Rod Side Clearance 0.11-0.51 mm (0.00433-0.02 inch)
Connecting Rod Bore Diameter- Bearing End 56.505-56.525 mm (2.224-2.225 inch)
Connecting Rod Bore Out-of-Round - Bearing End - Production 0.006 mm (0.0002 inch)
Connecting Rod Bore Out-of-Round - Bearing End - Service 0.006 mm (0.0002 inch)