LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Front End Discriminating Sensor Replacement >> Installation Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Installation Procedure

  1. Install the front end discriminating sensor to the vehicle.
    NOTE: Refer to FASTENER NOTICE .
  2. Install the 2 integral bolts that retain the front end discriminating sensor to the frame front crossmember.

    Tighten 

    Tighten the bolts to 8 N.m (71 lb in).

  3. Connect the sensor electrical connector (2) to the front end discriminating sensor.
  4. Install the CPA to the sensor electrical connector.
  5. Enable the SIR system. Refer to Enabling the SIR System .
    Fig 1: Connecting Front End Discriminating Sensor Electrical Connector
    G01814791Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals