LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Venture Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 772 (Cruise Control System) >> Diagnostic Information and Procedures >> Scan Tool Data Definitions (Cruise Control)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Scan Tool Data Definitions (Cruise Control)

WARNING: This page is about a different car, the 2002 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Cruise Control Active  : Displays Yes or No. The status of the cruise engaged signal. The cruise control module grounds the circuit when cruise control is on.

Cruise Inhibit Reason  : The scan tool displays the last cruise control disengage. There are 20 possible causes for cruise control disengagement.

Cruise Release Clutch/TCC Pedal Switches  : Displays ON or Off. The status of the cruise release signal circuit. The TCC/Brake pedal switch and the Clutch Pedal Position (CPP) switch if equipped, are normally closed switches, in series, controlling the cruise control cancel circuit.

Cruise Inhibit Signal Command  : Displays ON or OFF. Indicates if the PCM is commanding the cruise control module to inhibit cruise control operation.

Vehicle Speed Sensor  : Displays km/h and mph. The vehicle speed sensor is converted into km/h and mph for display.

scientia non olet · About LEMON Manuals