Installation Procedure
WARNING: This page is about a different car, the 2002 Cadillac Seville. However, it is still accessible from the selected car via links, so may be relevant.
Important: During installation ensure that the child tether anchor (1) is installed with the anti rotation tabs firmly seated in the anti rotation holes on the cross car beam. The anti rotation tabs face forward on both the left and the right sides. For the center child tether anchor (1), the anti rotation tabs face the rear of the vehicle
- Install the child tether anchor (1) to the cross car beam.NOTE: Refer to Fastener Notice on page P-9 in Cautions and Notices.
- Install the child tether anchor fastener (2).
Tighten
Tighten the fastener to 30 N.m (22 lb ft).
- Install the rear shelf panel reinforcement. Refer to TRIM PANEL REPLACEMENT - REAR WINDOW SHELF .