LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chevrolet >> 2002 >> Venture Base, Van Passenger >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Theft Deterrent System >> Repair Instructions >> Theft Deterrent Control Module Replacement >> Removal Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal Procedure

  1. Remove the instrument panel (IP) knee bolster. Refer to KNEE BOLSTER REPLACEMENT .
  2. Remove the ignition lock cylinder. Refer to IGNITION LOCK CYLINDER REPLACEMENT -- ON VEHICLE (CYLINDER ROTATES) or IGNITION LOCK CYLINDER REPLACEMENT -- ON VEHICLE (UNABLE TO ROTATE CYLINDER) .
  3. Remove the upper steering column shroud.
  4. Disconnect the electrical connector at the base of the steering column.
  5. Pull the PASS-Key* III module from the ignition lock cylinder housing.
    Fig 1: Disconnecting Electrical Connector At Base Of Steering Column
    G01813549Courtesy of GENERAL MOTORS CORP.
  6. Remove the electrical connector and wires from the steering column.
  7. Remove the PASS-Key* III module from the vehicle.
scientia non olet · About LEMON Manuals